What is the best harness for each model?

(runta.com)

217 points | by Edward40 4 hours ago ago

86 comments

  • seizethecheese 2 hours ago

    The headline here is confusing. They ran a bunch of harness and agent combinations on terminal bench tasks, and 64% of the spending was on tasks that didn’t pass terminal bench verifiers.

    It’s unclear whether that’s supposed to be surprising against the selected models for the benchmark. I suspect it’s not and the headline is written to pander to “wasting money on AI” upvotes.

    Edit: they changed the title. The one used to get to the front page was something like "Across N agent runs 64% of agent cost went to failing runs".

    Edit2: since the link is poor quality, I tried to answer some of these questions myself using 927k agent runs vs. this blog post's 27k: https://micjm.com/blog/on-model-harness-interactions/. The upshot: there's not a lot of harness x model interactions. OpenAI models do seem to have a preference.

    • seizethecheese 2 hours ago

      Okay, I wanted to know “which tasks” and dig into the methodology, and its documented nowhere!

      A serious effort here would use a specific set of terminal bench questions. Instead these look like cherry picked questions. How were they picked and why? Without an answer we should assume they were picked to produce some result.

      • Edward40 an hour ago

        Sorry for the inconvenience. We ran 27,280 total trials on Runta (1–4 vCPU, 2–8 GB RAM, 32 GB disk) using the 62-task frontier-harness-eval@v1.1.0 dataset across 5 models and 22 harnesses on Baseten, with 4 attempts per task. Every harness and model ran at max effort with a 131,072 max output token limit per request and per-task agent timeouts ranging from 15 minutes to 8 hours.

        For scoring, final passes are divided by scored attempts, where infrastructure errors are excluded from the denominator, timeouts are still graded by the verifier, and reward hacking (such as looking up solutions online) counts as a failure. Costs are calculated using list price multiplied by reported tokens.

        https://hub.harborframework.com/datasets/frontier-harness-ev...

        • seizethecheese an hour ago

          This doesn't answer the question at all.

          • dotancohen an hour ago

            It's still the most informative thing to come out of that account or the linked article.

      • jzemeocala 2 hours ago

        For real, i remember setting up advanced Linux configurations back before the 3.0 kernel and I'm pretty sure I had a higher failure rate.

        The biggest difference is that I, as a human, get mentally exhausted. but modern AI (when given unlimited tokens and tools) is like if Stephen hawking had a meth habit and the tenacity of Sisyphus with a bad case of syphilis after being told he can be cured if he can get that boulder over the hill

        And even if they did try to test them on a lot of gotcha tasks; I'm perennially reminded of the ever-relevant quote about AI and other tech: "this is the worst it will ever be"

        • dotancohen an hour ago

          That quote is outdated. My phone nags me now twice daily to update, and the update removes features I use so I'm careful to tread around it.

          My Windows work desktop has two orders of magnitude more memory and more processing power than the last time I used Windows, yet boots slower and is laggier than any Windows I've ever used.

          Almost all useful information online is concentrated into YouTube and Reddit, everything is advertising and trying to steal attention. I'm not even welcome on Reddit anymore due to the media campaigns against my country and race.

          We've definitely passed the point where the derivative has gone negative.

      • Edward40 an hour ago

        I'm also building a leaderboard in the meantime, which will release in a few days with more detailed harness version info and methodology.

      • seizethecheese 2 hours ago

        Confirmed. This is 17 TB4 tasks and 45 TB2.1 tasks. Why?

    • Edward40 34 minutes ago

      Good finding! Model preference is interesting.

    • Edward40 2 hours ago

      Because these tasks are genuinely hard and require long-horizon reasoning, running full evaluation experiments gets expensive fast.

      For example, on bun-sourcemap-leak (https://hub.harborframework.com/tasks/terminal-bench/bun-sou...), all 440 trials finished cleanly with zero infra errors or timeouts, yet 0 out of 440 passed all hidden-variant tests (the best was 35/36 across three DeepSeek V4.1 Flash runs).

      Some of these tasks take up to 8 hours per run, so if you are not careful, you end up burning massive amounts of compute and API spend just to get an accurate evaluation signal.

      • warkdarrior 19 minutes ago

        I wouldn't call it "burning of tokens and compute" if you get a useful signal out of it.

    • plufz 2 hours ago

      Yeah exactly, compared to what baseline? People here will probably be stunned when I say this, but my pre-agent code was usually not bug free on my first attempts either.

    • themgt 2 hours ago

      Over the 22 harnesses, the rank correlation of the steps per pass and the cost per pass was +0.51 (p = 0.015). For the other three factors, it was −0.03 to +0.02 (p ≥ 0.88). Within each model, tool calls tracked cost as well as steps. Table 4 below and Table 5 in the appendix give the values.

      For harness developers: cut steps, not just prompt tokens. Prompt size, tool count and cache hit rate did not predict cost per pass. Steps did, because every step sends the whole context again.

      Incredible, none of these harness developers considered just asking the LLM to solve the problem right away! Don't siege Leningrad, take it immediately!

      • Edward40 2 hours ago

        Cutting the system prompt and tools is easy. Cutting steps requires understanding the model's RL strategy and how it was trained to explore.

        • bisonbear an hour ago

          I wonder if Claude Code would do better given they just introduced code mode, which should significantly cut the number of steps required

    • adrithmetiqa an hour ago

      Agreed. Does this help anyone decide what model or harness to use. Nope.

  • Zigurd 3 hours ago

    I find myself pulled in two directions by the performance of coding agents: First, keeping them on a short leash seems sensible. I don't get failed results very often. When I first started using coding agents, this seemed not just sensible but required in order to not deal with a lot of hallucinated weirdness. Secondly though, it's pretty cool to vaguely wave your hands in a certain direction and get both user interface and business logic that's objectively nicer than I would've gotten from the effort I would've put into manually coding. Whenever I cautiously use a coding agent, I wonder what I am missing by not letting it cook.

    • contravariant 2 hours ago

      I think Conway's law applies. In an ideal situation your code mimics your organisational structure.

      The places where you let an agent do its thing is bound by the (implicit) interface your prompt creates. In an ideal situation this interface is a simple isolated thing in your application.

      If you just let it do its thing, expect a monolith. You shouldn't rely on it coming up with interfaces that mesh well with what you had in mind, and each of those interfaces represents a decision that it took, restricting future iterations of the code. So a monolith is not only what you can expect, but also the best you can hope for.

      If you want to let it cook, create more places for code that does a thing and you don't care how.

      • dcss_gardener 10 minutes ago

        You can steer it a lot with implicit context too, like ants following pheromones. If you put an empty docs/ dir in your repo agents will put documentation there without being told. If you put one inline test, they'll write every test inline. If you seed a decision record they'll record their decisions. If you have a lowercase sql query they'll use lowercase sql. If you write a test for wcag AA contrast they'll make ui with wcag AA contrast. And so on.

        With some up front care you can create an environment where they mostly do what you want when you let them rip without oversight. As the codebase grows it becomes less likely they'll see any one example, and more rarely expressed ones can get missed. And then codebase predating LLMs or designed without this consideration you just have to accept what you get or wrangle them manually.

      • Ericson2314 2 hours ago

        BTW the usual point of Conway's structure is to try to adjust the org / who is working on the software, so you don't get a bad software architecture.

        The "objective" nature of code is revealing a flaw in the human division of labor.

      • pjc50 2 hours ago

        Oh that's a good insight. The agent counts as part of the "organization" for this purpose.

    • nolok 2 hours ago

      I don't understand why that idea was adopted that IA had to be that "give one command have a perfect run and correct answer" thing when it's clearly not how it works and an eternal "the last % is worth 99%" issue.

      I know why the US frontier labs push it of course, you can't push a trillion dollar plus idea if you also say it should be a cheap commodity and the best and latest are now the answer, a bazillion mid levels are.

      But most work of value I do is with a swarm of "not the latest nor the brightest" models, with a smart one controlling the dance. Most decisions or review is better done through consensus. The myth that "if we keep going it will reach a point where it's always correct" seems so obvious to me, it doesn't work like that, for that matter we don't work like that.

      This is not a jab at it. I work with it. I love it. But I think the story imperative are a mismatch for the actual needs of most companies, and it's hiding between the "frontier needs" of special research & co, or the governemental needs.

      On the same line of thought: it's pretty obvious as great as these things are, no they're not going to "replace all employee", and no employee without them won't be able to compete either. They're a supercharger, a self multiplying smart assistant with capabilities in any field, and it feels so wrong to me that they've been presented in a complelty different way.

      • krrrh 2 hours ago

        > it doesn't work like that, for that matter we don't work like that.

        The parallels with self-driving cars are interesting. We demand that agents don’t just produce better code than most humans (which the frontier models do), but that they perform much much much better.

      • wat10000 2 hours ago

        I recently tried some personal evals to see how some different models performed. I was trying Opus, Sonnet, Gemini 3.8 (this was pre-Argon) and a couple of others. I picked a pull request I'd recently made with heavy Claude assistance, one that seemed simple enough to be quick to solve but with enough subtleties that I could differentiate the results. Set up the agents to run clean without knowledge of the solution, and set them loose.

        To my surprise, none of them came close to producing an acceptable PR. Quality varied, but even the very best results were missing significant pieces.

        My takeaway is that the human in the loop is still massively important for many things. And that makes it really hard to come up with a useful benchmark.

    • embedding-shape 2 hours ago

      Not every problem should (or even could sometimes) be solved the same way. Are you planning to maintain the produced code for more than a year? No, then wave away. But if you're expecting others to depend on it, and you want to be able to continue evolving what it is, then a tight leash and full understanding of how it actually works, is very much needed, even if you don't actually type characters into an editor anymore.

      Otherwise you still end up with balls of spaghetti where each change takes longer and longer to work into the codebase. With a bit of planning, you can keep tackling changes and they keep taking the same amount of time more or less.

      • smallnamespace 2 hours ago

        The cost of AI is rapidly falling while its engineering capabilities keep rising. This implies that code is becoming more fungible, and you should expect any code you write today to mostly be replaced in the near future.

        The requirements will be more stable than the code. Focus on them instead.

        • datsci_est_2015 2 hours ago

          Robust systems experience very little turnover in nearly every non-software discipline that involves systems. Why the hell would we insert risk into our system-building processes by needlessly turning over code?

        • Zigurd 2 hours ago

          > The requirements will be more stable than the code.

          These kinds of changes to the way teams are formed and managed, and how products are developed is what really fascinates me about the impact of coding agents.

          Even if it works, for some definition of works, to dump a huge spec into a coding agent context window, I suspect this is where a lot of horror stories about agentic coding come from.

          Teams, and the management structure above them, are going to have to get used to more collaborative and iterative product definition and development in order to extract the most value from coding agents.

        • catdog 2 hours ago

          > The cost of AI is rapidly falling while its engineering capabilities keep rising.

          Wouldn't count on it. There likely is a ceiling, we might or might not be near it.

          • reddit_clone an hour ago

            Definitely with the cost. I strongly believe the price now is heavily subsidized and will shoot up in the future. (Not new. First hit is free..)

        • wtch98 2 hours ago

          > The cost of AI is rapidly falling while its engineering capabilities keep rising. This implies that code is becoming more fungible, and you should expect any code you write today to mostly be replaced in the near future.

          I have code I wrote in 2006 which is still in daily use adding business value at my company. Why would it need replacing?

        • tempfile an hour ago

          > This implies that code is becoming more fungible

          Code has always been fungible, in the sense that it could be refactored.

          > you should expect any code you write today to mostly be replaced in the near future

          Why on earth do you think this? It does not follow from your other points. Just because you could turn your business into a rube goldberg code juggling machine, why would you?

          • skydhash 36 minutes ago

            it's amazing that you could read a book like "The Design and Implementation of the 4.4 BSD Operating Systems" (1996) and still find it relevant to browse the code of OpenBSD and NetBSD, three decades later. While good software gets plenty of updates and additions, the core ideas barely bulge over time. A lot of churn is people playing around with no reason instead of solving the problem properly the first time.

      • krrrh 2 hours ago

        A shift is realizing that refactors go from something that was costly and infrequent to something that can happen inexpensively and frequently. It takes some rebalancing.

        I recently used agentic processes to bring a young codebase to a functioning state very rapidly. This forced discussions about design principles that were folded back into a short document in the repo which then led to a major refactoring plan, and a massive pruning of code that was written the week prior. There are solid engineering approaches in the codebase now that wouldn’t have been achieved without this discovery process.

    • rrr_oh_man 2 hours ago

      > objectively nicer than I would've gotten from the effort I would've put into manually coding

      I find that only works with topics I know very little about.

      • datsci_est_2015 2 hours ago

        This comment could be interpreted at least two ways, and I’m not sure which it is:

          - tongue in cheek: in topics you know very little about, you don’t have the ability to tell whether the LLM output is trash or not
          - very serious: LLMs allow you to create things you could not have created before due to not having the knowledge
        
        Sort of like a Dunning-Kruger or Gell-Mann amnesia.
        • devmor 2 hours ago

          I don't see why both can't be true.

          LLMs are allowing people to create things with very little effort compared to before, and those creations are of questionable quality - indeterminable by the LLM-user due to a lack of experience.

          • ygjb 2 hours ago

            So, basically, the same as before, but LLMs provide the creations of questionable quality at a faster rate :P

            I think the quality of the results vary with the rigor of the process. If you one-shot prompt a new service (even with Fable5) "build me an airtable competitor, no bugs", you will get some real code camp quality results, but a well defined set of prompts and a workflow that leverages multiple coding agents reviewing each others work, and implementing test cases at a relatively granular level yields radically different results.

            Couple that with a rigorous design/spec session, and multiple checkpoints (say at release milestone) to monitor drift from the original design makes the process a bit more intentional and measurable, while still being far faster than a typical engineer can build.

            • yugoslavia4ever 2 hours ago

              Yes, but before you learned as you went, researching and finding out what good (or at least better) looked like; what learning is done when you wave your hand?

  • xyzzy_plugh an hour ago

    I don't like this framing.

    For a given model, the best harness depends on the problem. As models become increasingly capable, the harness appears to matter more than the model. This is perhaps controversial but allow me to explain.

    Most of my problems are in a single domain, using specific tools and programming languages. I give whatever model de jour the specific tools it needs to solve the problem. I don't let it execute arbitrary scripts or programs (though it can, if it really tries). I give it a restricted number of calls and I feed that information back into it (budget). I let it farm out work to other models, using the same harness. I give everything a budget, which is tracked and enforced, but it's not real, and refills at different times.

    This bespoke, specialized harness absolutely smokes any other mainstream harness for these tasks. Significantly faster, cheaper, more correct.

    But I can't build a mobile app with this harness, or make a movie.

    These tests are doing the same thing. They measure a handful of scenarios. I can't easily tell if those map to my needs or not. In my experience, very few of them do.

    Can these general purpose harnesses solve my problems? Yes, if I'm willing to let the model churn for a long time and burn a lot of tokens. But that doesn't feel like a sustainable practice.

    Maybe I'm too early, maybe it's premature to optimize the harness this way, but I'm spending fewer tokens than my peers and getting a lot more done, and that matters.

    • botanrice 24 minutes ago

      hey! would you be so kind as to share your method or point me in the direction towards resources on how to setup a harness as you describe?

      I've been tinkering with harnesses recently but have mostly used github copilot on vscode mostly thus far as my ai tool and feel like the harness setup on there is lacking (or really confusing...). many thanks if so :)

      just trying to learn without googling "how to setup a harness" and get bombarded by a trillion yt vids or competing harness providers lol

    • Edward40 32 minutes ago

      I am thinking about how to measure the efficiency of ultilzing existing context in one specific domain.

  • ford 2 hours ago

    To be clear - "Failed" here means "Did not meet all pass criteria on a given benchmark task", not "Experienced a runtime failure"

  • bisonbear 2 hours ago

    These are cool results and I'm glad that tokens are being invested to eval harness capabilities.

    However, I am hesitant on the correlation between pass/fail in evals which are a binary 0/1 determined by tests, and real world usage, where users can steer, run code review, and care about more than just test pass/fail.

    I wrote about the problem of determining "success" for coding agents, and a lot of it boils down to the fact that agents can write dumb code that passes tests, and write smart code that fails tests, and we need to shift to rewarding quality of code and alignment with intent rather than just signal on held out tests (which is still important!)

    https://www.stet.sh/blog/cost-per-successful-task

    • Edward40 2 hours ago

      "Cost per pass" is distinct from "cost per successful task."

      Cost per pass is simply the average cost per task divided by the pass rate.

      If you draw a line from the origin to any harness on that chart, its slope (pass rate á cost) represents passes per dollar. Cost per pass is the inverse of that slope, meaning the lowest cost per pass gives you the steepest line.

      • bisonbear an hour ago

        In this case, I am not entirely sure how cost per pass is distinct from cost per successful task given that success is defined as pass/fail.

        To illustrate the difference, the author of FrontierHarness included "Figure 3. Cost and pass rate of each harness with each model", in which we can see that Codex CLI has $0.937 cost per pass, but a $0.573 cost per task. Measuring cost per task also changes the winner to OpenCode

        • Edward40 7 minutes ago

          We use cost per pass, not average cost per task, because we want to see the harness keep a high pass rate and low cost at the same time.

  • scubazealous 2 hours ago

    While this could be better, I wonder how much time the average developer spends on runs that fail? How much time do students spend on runs that fail?

  • SAI_Peregrinus 39 minutes ago

    When a task passes all tests, it's done. More tokens should be spent on failing runs, because most runs where tokens are used should fail. For the same reason that your lost keys are always in the last place you look for them.

  • fennecfoxy 2 hours ago

    Yeah, developers sometimes go down the wrong path as well. It's a non deterministic system exploring a huge problem space...

    • bityard 2 hours ago

      This is a good point. I'm (so far) only a hobbyist developer and _most_ of my non-trivial projects took at least 2 prototypes before getting to something that was fully usable with few caveats or technical debt.

      I think this is not too different from physical products, either. You often hear of companies spending multiple years and iterating through dozens of prototypes in order to bring something new to the market.

      I don't think there is a shorter path: you never truly understand a problem until you take up the engineering work to solve it.

  • evalstate an hour ago

    Just use a harness that has been properly integrated and tested with each model, with published traces and comparisons (author of) https://fast-agent.ai/benchmarks/

    GitHub and Copilot CLI have started to do the same btw (not sure if they publish the traces/reward hack results). But we should normalise this as consumers shouldn't be forced in to playing this game.

  • winddude 13 minutes ago

    Reading a lot of the comments everyone is talking about state actors, etc.

    Let's not forget multiple departments like the Pentagon, FAA, Homeland Security etc, have been raising alarm that things like this were becoming a heightened risk since Trump and Musk cut ~300k jobs with DOGE, and slashed civilian contractors across nearly every department.

  • worik 9 minutes ago

    Given the variation between results for different, but similar capability models it is hard to take this seriously

  • samueloph an hour ago

    Am I'm missing something or at this point the distinction between "harness" and "agent" doesn't exist anymore because too many people use them interchangeably?

    Is this post mixing them up or is my understanding of these concepts off?

    • layer8 an hour ago

      harness + model = agent (plus sub-agents)

      Do you have a different understanding?

    • ogmutlu an hour ago

      They mean the same thing?

  • cronin101 2 hours ago

    I'm far behind the curve with local/open weight models, but I thought it was common practice that you should do some last-mile fine-tuning on the particular harness that you're using and would get a reasonable return on investment for doing so (particularly on quantized models)?

    Can anyone confirm/deny this is the case?

    If so, it seems a shame not to include this practice into the reporting methodology for full transparency.

    • bisonbear an hour ago

      In MiMo's v2.6 public RL training run, they explicitly trained on 23 different harnesses in order to minimize overfitting on any single harness. I imagine that this technique has to be common in RL training runs given that model providers have little control over where their models are used.

      https://mimo.xiaomi.com/rl/#overview

    • hedgehog 2 hours ago

      It's typically easier to tune the harness around the models' existing behavior. In my experience the primary failures in models > 5B params on coding tasks are just that they aren't able to translate instructions into a correct description or implementation of the problem (will write wrong code, wrong tests, and wrong documentation). The basic tool calling and syntax of generated code is fine.

    • ford 2 hours ago

      I don't think this is common, though it would be interesting if ThinkingMachines/HuggingFace/OpenRouter/BaseTen offered fine-tuned variants of the most popular open models that worked with specific harnesses

      • cronin101 2 hours ago

        In hindsight I think I overestimated how common/achievable this is with the logic that if PewDiePie could do it, so could a layman https://felloai.com/pewdiepies-ai-model-beats-gpt-4o/

        However, the hardware requirements are still quite enormous.

        I could see a gap in the market for crowdfunded (gofundme?) post-training of open-weight models, per harness. I estimate that the one-time compute cost is probably $x000 so this scales nicely with a large number of interested developers that could reuse the weights.

    • jrmg 2 hours ago

      What does "last-mile fine-tuning on [a] harness" mean?

      • cronin101 2 hours ago

        Taking the open weight model and altering those weights in order to overfit for success on the tool shape / quirks of the harness you are running the model within.

        As with most post-training this would be done via some scored/verifiable problem set (we can probably tell if the tool calls blew up during the coding trajectory) e.g. a known set of input tasks where solutions can be verified.

        Last-mile aka doing in yourself (on box) vs the compute cluster that created those open weights.

        https://en.wikipedia.org/wiki/Fine-tuning_(deep_learning)

        I believe (at least this used to be the case) that heavily quantized models that are designed to fit on consumer hardware have inflated failure rates and this can claw back quite a bit of reliability.

  • augment_me 2 hours ago

    This is completely expected. Agents are pseudo-greedy search functions that brute-force solutions using their context.

    If you want perfect search, you need lossless compression, which defeats the point of the current systems that are lossy L2-optimized representations of all information.

  • bob1029 2 hours ago

    The entire point of this AI thing is that the cost of failure is now ~zero. You can try again in a few minutes / hours. A traditional software business might only complete one iteration before time runs out.

  • jrmg 2 hours ago

    "In 27,280 coding agent runs, 64% of inference spend went to runs that failed" (the title this submission was submitted with) is a pretty editorialized title.

    The page's title is: "Introducing FrontierHarness Eval v1.1"

  • andai 2 hours ago

    >Through our experiments, we found that you should consider switching harnesses when switching models to maximize your experience.

    I've seen this for years, and seen several papers that studied it: the same prompt will help with one LLM and harm performance for a different LLM on the same task.

    And on benchmarks which test LLM x Harness, they find that LLMs tend to do way better with their "own" harness. (Or in the case of Chinese LLMs, the harness of the LLM whose training data they borrowed :)

  • Majromax 3 hours ago

    Saying that 'steps per pass' explains cost seems nearly tautological. Run costs are proportional to the number of tokens produced, and the number of tokens is strongly correlated to the number of steps.

    The 'steps per pass' criterion is also not something under the harness's direct control in the way that its tool collection and system prompt (/start tokens) are. Even the cache hit rate is hard to control beyond a limit, since modern harnesses rarely rewrite history.

    I'm also suspicious about the run-to-run variance between models. Given the high variability within the presented results and the observation that failed runs (which can spin for a long time before delivering a wrong answer) account for a majority of the cost, I'm not sure that many of the conclusions here would hold up under a second sample.

  • colinmarc 2 hours ago

    How are people even using Baseten for coding agents? I am using Pi (so very small requests) in a "normal" single-agent way and I hit the rate limits on throughput immediately.

  • WorldPeas an hour ago

    evolving harnesses are also a cool development I've seen recently though I feel they'll have diminishing returns https://www.alphaxiv.org/abs/2609.01437

  • brookritz 18 minutes ago

    The TLDR saya: Basesten, Harneas and Leaderboard and still have no clue.

  • justincormack an hour ago

    You do need to optimise prompts too, eg I found that openai models just gave up in Pi, but adding a line to the prompt matching Codex eg "Once implementation is authorized, the agent should persist through the bounded change, tests, review and final validation. Complexity, expected duration and context compaction alone are not reasons to stop." fixes that. Otherwise it would look at tasks and say they were too hard.

  • BugsJustFindMe an hour ago

    This is nice and all, but I really want to see the best harness for the actual frontier models ChatGPT and Claude, not just open weight models.

  • 0xbadcafebee an hour ago

    The choice of agent/harness is, as people frequently point out, just one of many variables that changes agent performance. Skills, MCPs, Extensions, system prompt additions, often have drastic effects, making things better and/or worse. It's interesting to compare them side by side, but probably won't reflect your own unique experience.

    Second thing to consider: ZCode was sending everyone's code to Alibaba... not sure I would use their harness just to save a few cents on coding.

  • maerF0x0 2 hours ago

    So? I'm sure exceedingly high amount of EC2 cpus are idling, or lost to discarded branch predictions etc.

    We waste whatever is cheap to gain what is dear.

    (Of course we iterate towards better, but that doesn't mean we delay shipment/usage once it's profitable / better than status quo)

  • jedisct1 an hour ago

    It would have been nice to see swival.dev in that list.

    But unsurprisingly, Codex works pretty well, too (and not just with OpenAI models), and Claude Code is just a waste of tokens and money.

  • shevy-java 2 hours ago

    Well, it is a milking system. You have to pay for those tokens anyway.

  • underdeserver 2 hours ago

    Wait till you hear what the human success rate used to be.

  • guanlan 4 hours ago

    Hi HN, I’m Guanlan, founder of Runta. The eval runs on our runtime, so weigh this accordingly.

    The short version: when you change the model, think about changing the harness too. On any one model, cost per pass varies by up to 4.4x

    What we ran: 22 harness configurations × 5 open-weight models × 62 terminal tasks × 4 attempts. 27,280 runs, 83B tokens. Each harness ran with default settings at maximum reasoning effort, each trial in a fresh sandbox. Costs are Baseten list prices times reported tokens.

    What we found: The lowest-cost harness changes with the model. Codex CLI ranks 1st on cost with GLM-5.3 and 15th with Kimi-K3. Paying more doesn’t buy passes. The harness with the highest pass rate ranked anywhere from 4th to 19th on cost. The model still sets most of the bill (93% of cost variation). The harness is the second lever. Starting prompt size doesn’t predict cost. Output tokens do. 64% of inference spend went to runs that didn’t pass.

    • radlad 3 hours ago

      Hi Guanlan, I vouched for your comment since you involved in this post, but you should be aware that all of your posts have been flagged, likely for AI patterns in your writing.

      > Don't post generated text or AI-edited text. HN is for conversation between humans.

      https://news.ycombinator.com/newsguidelines.html

    • latentsea 3 hours ago

      This is why for open-weights models at least harness aware post-training is becoming a thing. Also closed source harnesses that aren't fully editable are basically an anti-pattern. The labs should just hurry up and productionize self-evolving harnesses, and have the models internalize harness engineering, so they can optimise the harness for the given task. These are solvable problems.