Colin here, creator of Nub. I’ve had the general shape of this in mind for years. Nub runs your code with stock `node`, augmented with a `--require` preload hook[0] that adds a transpiler (oxc-powered, packaged as a Node-API add-on), registers a module resolution hook[1], and injects polyfills as needed for APIs like `Worker`, `Temporal`, etc. All purely additive, your code ultimately runs using Node’s actual engine & stdlib implementations.
I’m surprised to see this using a `--require` hook (rather than `--import`). Maybe something’s changed significantly since I was looking into building some similar functionality… but it makes me wonder about nuances in nub’s ESM support.
(When I was investigating this it was very early in Node’s `--import` story, but there were several edge cases with the more common ESM-to-CJS approaches that I wanted to address. Most were probably exceedingly niche concerns, but I’d expect top-level await to affect a meaningful subset of users.)
We use this to register our preload purely for performance reasons. In this and many other cases CommonJS is still faster than ESM. Using --require is about 0.5ms overhead vs 4.6ms for --import (on my M1 Macbook Pro).
Relatedly Node.js recently (2025) introduced a synchronous version of its resolver hook registration API (`module.registerHooks()`) specifically to improve performance over the old async `module.register()` API. It was a big unblocker for Nub. For the interested, the async API added 19ms fixed registration overhead + about 130us additional overhead per import.
Which flag Nub uses here doesn't impact userland at all, TLA is supported wherever it's supported by Node.js itself.
Respect for embracing existing tech instead of rewriting a worse version of it. Wonder where we would be today if all alternative-building effort went to Node instead (with proper leadership).
You might remember the io.js fork of Node.js back in 2014. Node was stagnating, a bunch of people forked it into io.js, which eventually got merged back into Node and got it back on track. Or, going further back, CoffeeScript, a "fork" of JS that had its best ideas adopted back into ES5.
A small scrappy team can prove out a good idea because failure is not a catastrophic risk to them. In short, forks are part of a healthy ecosystem.
It is still happening, a lot of things are still being adopted by Node after being available on other runtimes. They aren't forks, but they still provide pressure towards progress.
Fundamentally you can't fix a lot of things with this approach.
Simple example: Node is the only serious OSS software I know of that has no way to document its config (in the config file itself). It's moronic! The Node people just adopted JSON without a thought, and then refused to consider any alternatives (even "JSON with comments").
When an organization digs into bad decisions, the only way to fix them is to start something new. The entire JS ecosystem will never have documentation on its config as long as everyone keeps building on top of Node.
(And there are many other issues like this in the Node ecosystem; the utter absurdity of not being able to document config is just my personal pet peeve.)
> Simple example: Node is the only serious OSS software I know of that has no way to document its config (in the config file itself). It's moronic! The Node people just adopted JSON without a thought, and then refused to consider any alternatives (even "JSON with comments").
Tangential but this also drives me absolutely nuts. If I have to see `"//": "some comment"` one more time I'm gonna lose it.
I’m wondering how that works. Deno has very complicated import resolution, so building my own import resolver to be compatible with it is a bit of a pain. (This is for a custom lint-like tool.)
Cloudflare Workers is a different runtime and has its own toolchain around it. Nub could theoretically support it when executing files (spawn `wrangler dev` instead of `node` if wrangler.toml is detected or something) but really I'm focused on making the Node.js experience as good as possible.
The other pieces of the toolkit could absolutely be used: package manager, script runner, package runner. Works with anything that implements the Node module resolution algorithm (actually Yarn PnP also works out of the box...).
Colin here, creator of Nub. I’ve had the general shape of this in mind for years. Nub runs your code with stock `node`, augmented with a `--require` preload hook[0] that adds a transpiler (oxc-powered, packaged as a Node-API add-on), registers a module resolution hook[1], and injects polyfills as needed for APIs like `Worker`, `Temporal`, etc. All purely additive, your code ultimately runs using Node’s actual engine & stdlib implementations.
[0] https://nodejs.org/api/cli.html#-require-module
[1] https://nodejs.org/api/module.html#moduleregisterhooksoption...
I’m surprised to see this using a `--require` hook (rather than `--import`). Maybe something’s changed significantly since I was looking into building some similar functionality… but it makes me wonder about nuances in nub’s ESM support.
(When I was investigating this it was very early in Node’s `--import` story, but there were several edge cases with the more common ESM-to-CJS approaches that I wanted to address. Most were probably exceedingly niche concerns, but I’d expect top-level await to affect a meaningful subset of users.)
We use this to register our preload purely for performance reasons. In this and many other cases CommonJS is still faster than ESM. Using --require is about 0.5ms overhead vs 4.6ms for --import (on my M1 Macbook Pro).
Relatedly Node.js recently (2025) introduced a synchronous version of its resolver hook registration API (`module.registerHooks()`) specifically to improve performance over the old async `module.register()` API. It was a big unblocker for Nub. For the interested, the async API added 19ms fixed registration overhead + about 130us additional overhead per import.
Which flag Nub uses here doesn't impact userland at all, TLA is supported wherever it's supported by Node.js itself.
I saw this on twitter and loved it, such a good move on your part Colin. Hope the project picks up tons of steam!
Respect for embracing existing tech instead of rewriting a worse version of it. Wonder where we would be today if all alternative-building effort went to Node instead (with proper leadership).
You might remember the io.js fork of Node.js back in 2014. Node was stagnating, a bunch of people forked it into io.js, which eventually got merged back into Node and got it back on track. Or, going further back, CoffeeScript, a "fork" of JS that had its best ideas adopted back into ES5.
A small scrappy team can prove out a good idea because failure is not a catastrophic risk to them. In short, forks are part of a healthy ecosystem.
It is still happening, a lot of things are still being adopted by Node after being available on other runtimes. They aren't forks, but they still provide pressure towards progress.
Fundamentally you can't fix a lot of things with this approach.
Simple example: Node is the only serious OSS software I know of that has no way to document its config (in the config file itself). It's moronic! The Node people just adopted JSON without a thought, and then refused to consider any alternatives (even "JSON with comments").
When an organization digs into bad decisions, the only way to fix them is to start something new. The entire JS ecosystem will never have documentation on its config as long as everyone keeps building on top of Node.
(And there are many other issues like this in the Node ecosystem; the utter absurdity of not being able to document config is just my personal pet peeve.)
> Simple example: Node is the only serious OSS software I know of that has no way to document its config (in the config file itself). It's moronic! The Node people just adopted JSON without a thought, and then refused to consider any alternatives (even "JSON with comments").
Tangential but this also drives me absolutely nuts. If I have to see `"//": "some comment"` one more time I'm gonna lose it.
Very smart. You can't lose all your customers for vibe-coding a migration to Rust if you are already written in Rust ;)
They'll get bought out by OpenAI and convert the project to Zig
huh, is OpenAI embracing Zig specifically? TIL
It also helps if you're already vibe-coded and don't have customers to begin with
Bun had customers?
Just merged a PR migrating our entire monorepo to nub.
0 issues, ridiculously fast.
You merged a PR migrating a shared monorepo using this within an hour of it being posted?
It entered public beta last week, but just getting on HN now.
> TypeScript-friendly resolution: extensionless imports, tsconfig.json#paths
I’m wondering how that works. Deno has very complicated import resolution, so building my own import resolver to be compatible with it is a bit of a pain. (This is for a custom lint-like tool.)
Love the idea, learning a lot of interesting things about node hooks by reading docs and some code
I didn't even click on the link. I just came to give the author a hat-tip on the project name. Well played.
Thanks :) Highly recommend clicking the link too!
Nice, I think this fills a niche. Does it work on cloudflare workers?
Cloudflare Workers is a different runtime and has its own toolchain around it. Nub could theoretically support it when executing files (spawn `wrangler dev` instead of `node` if wrangler.toml is detected or something) but really I'm focused on making the Node.js experience as good as possible.
The other pieces of the toolkit could absolutely be used: package manager, script runner, package runner. Works with anything that implements the Node module resolution algorithm (actually Yarn PnP also works out of the box...).
Nice. Can we get `nub --compile` up in there like Bun has?
Coming very soon!
nice ! does this work on docker containers ?
Yep, full support on macOS, Linux, Windows. No official image yet (I'll start on this now) but you can get started with something like this.
Works with any Node version down to 18.19 but recommend 22.15+ for best performance (that's when synchronous registerHooks was introduced[0])[0] https://nodejs.org/api/module.html#moduleregisterhooksoption...