I want Oxide to do so well. The product is a breath of fresh air in the era of cloud providers. As an engineer, I'd kill to get to work with their hardware.
Not to mention that working at Oxide sounds like a modern Sun Microsystems with the ideology that team has. Highly recommend their podcast "Oxide and Friends", and their original "On The Metal" show.
I've attempted to apply to their company multiple times over the years, only to be stun locked by the application process. Not because it's a bad process, but because I feel I'm not up to par as an engineer. Maybe one day I'll go through with it.
Oxide certainly sounds cool. I don't need to work there-- I just wish I could work with the Oxide gear in Customer engagement. I don't work with businesses big enough to need it but it looks sweet.
Just a gentle reminder that a company may portray itself as cool to customers, but is not cool to their own current or future employees.
Their interview process was shady. There was a post here about 1-2 years ago that was a link to their interview process and how open and transparent they were. The post itself was from an employee and a fellow commenter who was gaslighting folks was also an employee. Several folks complained about the tremendous amount of homework they had to do after the initial screen, and once submitted, were ghosted. One of employees repeatedly rebutted that claim in the comments, and they did this for quite a few commenters. Was a not a good look. I doubt much has improved since then as seeing the comments below confirms the same mess.
Don't spend time being amazed by folks who won't treat you right. It just ain't worth it.
Devils advocate (really not affiliated with oxide, but I have worked for a ādesirableā employer before).
How would you handle a few thousand applicants for a single role?
I think no matter what you do it will feel inhumane, we can argue that a few hours of work for a take home test is inhumane too, being ghosted after doing one definitely wouldnāt pass my personal bar of acceptability, but if its the first stage and the task would take a properly qualified applicant less than 30 minutes then I canāt fault.
How would you do things? remember that it has to scale and you cant leave any gaps based on human fallibility (HR/Hiring Managers are humans and will forget if there are too many things going on at once).
I've gone through the same process, not so much that I don't think I would be worth considering, but serious code and documentation examples aren't something I can really give out given that they're proprietary. this last winter I started a whole guest-kernel based syscall intermediation and distribution framework in rust just for the application. with all kinds of design documents. I was about 30% finished by the time I landed a job somewhere else :)
but I still applaud the intent. I self-selected out by giving into scope creep
no, they want a questionnaire, a coding sample, and an example of technical writing. there's a reasonable interpretation of that that doesn't involve writing a distributed unix.
Sounds approachable, and something that would be evaluated based on merit.
As usual, I'm assuming the assignment is evaluated based on a reasonable time-commitment. From what the recruiting experts tell me, it's a good strategy to spend as much time as possible, the deliverable is better, and the optics aren't bad either, it signals investment into the application instead of signalling spray and pray application broadcasting.
This design feels very obvious-in-hindsight. Consolidate power adapters and networking, replace cabling with pluggable slots. It's something similar to what IBM mainframes or Sun cabinets could've looked like. Somehow hardware giants like Dell, HP, SuperMicro, etc didn't make a product like this, even at their peak in 2000s or during cloud boom in 2010s. I wonder why?
Beautiful machine, and fun to see Illumos heart still beating inside!
> Somehow hardware giants like Dell, HP, SuperMicro, etc didn't make a product like this, even at their peak in 2000s or during cloud boom in 2010s.
Not so sure about this one. HCI (Hyperconverged) rack units (where storage and compute live in the same racked systems) and "blade servers" have been a thing for a really long time now; compute sleds aren't what's novel here.
Rack-level DC conversion is also not particularly novel, although underutilized IMO. It was pretty popular in HPC style density applications for awhile (see HP/SGI Altix 4000 for a good old example).
What's unique about Oxide is that they went all the way down to the firmware and then back up, rather than doing commodity hardware integration or reselling - for example, you can get something like a Supermicro EVO:Rail, but it will be running VMWare, not a fully integrated platform.
> Somehow hardware giants like Dell, HP, SuperMicro, etc didn't make a product like this,
Dell and HP both have "blades" that plugged into a blade-chassis. The chassis had all the lights out mgmt as well as power/networking integrated so the blade was basically a metal box with compute/memory/storage and it just slid in to the dock.
I am sure that supermico had something like this as well
Also, a big cabinet into which you plug varying amounts of hardware capacity, then use the control plane to partition into various virtual resources, describes at least at the conceptual level IBM going back decades.
I don't recall if the price was confidential, but I will say that it's higher than that, and that it has been influenced by the RAM cost increase.
If I recall when comparing to competition, it was premium priced, for sure, but it's more that it's so dense that you had to compare 1 Oxide rack to like 4 commodity racks. Spec for spec I recall that the premium for the verticality wasn't that high.
I want Oxide to do so well. The product is a breath of fresh air in the era of cloud providers. As an engineer, I'd kill to get to work with their hardware.
Not to mention that working at Oxide sounds like a modern Sun Microsystems with the ideology that team has. Highly recommend their podcast "Oxide and Friends", and their original "On The Metal" show.
I've attempted to apply to their company multiple times over the years, only to be stun locked by the application process. Not because it's a bad process, but because I feel I'm not up to par as an engineer. Maybe one day I'll go through with it.
Oxide certainly sounds cool. I don't need to work there-- I just wish I could work with the Oxide gear in Customer engagement. I don't work with businesses big enough to need it but it looks sweet.
Just a gentle reminder that a company may portray itself as cool to customers, but is not cool to their own current or future employees.
Their interview process was shady. There was a post here about 1-2 years ago that was a link to their interview process and how open and transparent they were. The post itself was from an employee and a fellow commenter who was gaslighting folks was also an employee. Several folks complained about the tremendous amount of homework they had to do after the initial screen, and once submitted, were ghosted. One of employees repeatedly rebutted that claim in the comments, and they did this for quite a few commenters. Was a not a good look. I doubt much has improved since then as seeing the comments below confirms the same mess.
Don't spend time being amazed by folks who won't treat you right. It just ain't worth it.
Devils advocate (really not affiliated with oxide, but I have worked for a ādesirableā employer before).
How would you handle a few thousand applicants for a single role?
I think no matter what you do it will feel inhumane, we can argue that a few hours of work for a take home test is inhumane too, being ghosted after doing one definitely wouldnāt pass my personal bar of acceptability, but if its the first stage and the task would take a properly qualified applicant less than 30 minutes then I canāt fault.
How would you do things? remember that it has to scale and you cant leave any gaps based on human fallibility (HR/Hiring Managers are humans and will forget if there are too many things going on at once).
I've gone through the same process, not so much that I don't think I would be worth considering, but serious code and documentation examples aren't something I can really give out given that they're proprietary. this last winter I started a whole guest-kernel based syscall intermediation and distribution framework in rust just for the application. with all kinds of design documents. I was about 30% finished by the time I landed a job somewhere else :)
but I still applaud the intent. I self-selected out by giving into scope creep
I'd be interested in the context if you'd be willing to share.
It sounds from the outside like Oxide has an interview process that requires some low level engineering work to be delivered? Maybe I got that wrong.
no, they want a questionnaire, a coding sample, and an example of technical writing. there's a reasonable interpretation of that that doesn't involve writing a distributed unix.
Sounds approachable, and something that would be evaluated based on merit.
As usual, I'm assuming the assignment is evaluated based on a reasonable time-commitment. From what the recruiting experts tell me, it's a good strategy to spend as much time as possible, the deliverable is better, and the optics aren't bad either, it signals investment into the application instead of signalling spray and pray application broadcasting.
A very beautiful website and a machine. Oxide folks should be proud, you can see the love that went into it.
Source code here :)
https://github.com/oxidecomputer/rack-explorer
This design feels very obvious-in-hindsight. Consolidate power adapters and networking, replace cabling with pluggable slots. It's something similar to what IBM mainframes or Sun cabinets could've looked like. Somehow hardware giants like Dell, HP, SuperMicro, etc didn't make a product like this, even at their peak in 2000s or during cloud boom in 2010s. I wonder why?
Beautiful machine, and fun to see Illumos heart still beating inside!
> Somehow hardware giants like Dell, HP, SuperMicro, etc didn't make a product like this, even at their peak in 2000s or during cloud boom in 2010s.
Not so sure about this one. HCI (Hyperconverged) rack units (where storage and compute live in the same racked systems) and "blade servers" have been a thing for a really long time now; compute sleds aren't what's novel here.
Rack-level DC conversion is also not particularly novel, although underutilized IMO. It was pretty popular in HPC style density applications for awhile (see HP/SGI Altix 4000 for a good old example).
What's unique about Oxide is that they went all the way down to the firmware and then back up, rather than doing commodity hardware integration or reselling - for example, you can get something like a Supermicro EVO:Rail, but it will be running VMWare, not a fully integrated platform.
> Somehow hardware giants like Dell, HP, SuperMicro, etc didn't make a product like this,
Dell and HP both have "blades" that plugged into a blade-chassis. The chassis had all the lights out mgmt as well as power/networking integrated so the blade was basically a metal box with compute/memory/storage and it just slid in to the dock.
I am sure that supermico had something like this as well
The vendors did make blades in the 2000s.
Also, a big cabinet into which you plug varying amounts of hardware capacity, then use the control plane to partition into various virtual resources, describes at least at the conceptual level IBM going back decades.
I learned about blade servers back in ~2010 because Blizzard used to run World of Warcraft realms on them and auctioned them off for charity.
https://warcraft.wiki.gg/wiki/Server_blade
https://en.wikipedia.org/wiki/Blade_server
It's a shame they missed out on the AI server boom.
I met Bryan Cantrill the CEO of Oxide many years ago. He's awesome. I am rooting for Oxide to become as big as Dell.
Oh wow, they're on the Epyc 9005 series now. Very cool. Dude, what a monster of a machine that rack is haha. Bloody hell.
The screen goes black for me after ~5s. I'm using Firefox on Linux, probably something to do with that.
Any console errors? Perhaps drop an issue on the repo if you have a moment: https://github.com/oxidecomputer/rack-explorer/issues
may the Sun never set
I wonder how much a rack like this costs
IIRC I heard that a single rack is upwards of $600kā$1m, but that was before the AI boom/crisis.
I don't recall if the price was confidential, but I will say that it's higher than that, and that it has been influenced by the RAM cost increase.
If I recall when comparing to competition, it was premium priced, for sure, but it's more that it's so dense that you had to compare 1 Oxide rack to like 4 commodity racks. Spec for spec I recall that the premium for the verticality wasn't that high.
With only 288 128GiB DDR5 ECC DIMMs? I'm sure that doesn't cost much.
Thats neat.
Neat